Protecta Help Desk Knowledgebase AZT+ products
AZT+ READY LED does not light up
Suggested knowledgebase articles:

AZT+ READY LED does not light up

The READY LED shall be green if the internal capacitor is charged and the trip circuit is continuous.

Note, that all three trip outputs shall be wired to a trip coil. If only one tripping coil is available (e.g. by medium voltage applications), all three trip outputs shall be paralleled to that coil. 

Was this article helpful? Yes | No

Article Details

Article ID:
31
Category:
AZT+ products
Rating :

Related articles